Data Logger Software C-LOGGERDC-JB/JC
DC-JA
Xem cỡ ảnh lớn

DC-JA




Easy to see!

Feature

  • White LCD display(LED back-light)
  • 7 digits(7-segment, zero-suppress), reset display, overflow display(8th digit can be displayed)
  • Reset key-lock provides
  • It is easy to change reset key-lock and counting speed with slide switch under the counter)

Specifications

Kinds

Addition type total counter

Model No.

DC-JA7-AW

DC-JA7-DW

Power source

100 to 240VAC(50/60Hz)

12 to 24VDC(Ripple 20% or less)

Fluctuation range

85 to 250VAC

12 to 24VDC±10%

Power consumption

1.2VA(when 240VAC)

0.7W(when 24VDC)

Front size

24×48mm

Number of digit

7 digits(8 digits with overflow display)

Display

7-segment LCD(LED backlight), height 9mm, width 2.95mm

Memory function

EEP-ROM(Re-writing 0.1 million times or more)

Counting speed

30Hz/1kHz changeover,
30Hz : contact, transistor, min. signal width 16.7msec(make ratio 1:1)
1kHz : Transistor, min. signal width 0.5msec(make ratio 1:1)

Input signal

Contact and open-collector(flow current when short-circuited : approx. 4mA)
Impedance when ON(short-circuited) : 1kΩ or less
Impedance when OFF(opened) : 100kΩ or more

Ambient temperature/humidity

-10 to +50 degrees C(-25 to +55 degrees Cwhen stored), 35 to 85%RH

Insulation resistance

100MΩ or more(500VDC megger) between conducting terminal and uncovered non-charged metal

Withstand voltage

2000VAC/min. between conducting terminal and uncovered non-charged metal

Noise resistance

Square-wave noise by noise simulator(Rising 1nsec, width 1µsec)
Common mode 2kV

Static electricity

10kV but 8kV when malfunction

Vibration resistance

Double amplitude 4mm, 16.7Hz (Malfunction : Double amplitude 0.5mm, 10 to 55Hz), each 1 hour in X, Y and Z direction

Impact resistance

294m/s2( Malfunction : 98m/s2) each 3 time in X, Y and Z direction

Starting time when Power-ON

2sec or less

Protective structure

IP66(Only front panel : must be using rubber packing)

Case material

Polycarbonate

Weight

Approx. 70g

Attachment

Mounting hook, rubber packing

External dimension

Counter

Panel-cut dimension

Connection

DC-JA(AC power)

DC-JA(DC power)

[Caution]

* Use the solderless terminal for M3.
* Use 2-core shield wire or metal wire tube and make it as short as possible. Don't make parallel wiring with power cable or high voltage cable etc.
* Counting input can't be accepted for 2sec after putting power source in.

Input circuit

Input(count/reset)

[Caution]

* Each input circuit of DC-JA series is common use for contact and transistor. Flow current from the counter is approx. 4mA. Use the relay for little current in case of contact input.


Các sản phẩm cùng loại
Electronic counter with DIN size
Electronic counter with DIN size
DC-M
DC-M
LED display DIN size Electronic counter
LED display DIN size Electronic counter
Total counter
Total counter
Electronic counter with DIN size
Electronic counter with DIN size
DC-JB/JC
DC-JB/JC
DC-JM
DC-JM

Joomlart
Designed: Hien Dai Hoa Jsc

lien ke van Canh HUD, du an van canh HUD, biet thu van Canh Hud, du an GELEXIMCO, du an cua HUD, biet thu tay nam linh dam, du an tay nam Linh Dam, du an xuan ngoc xuan phuong, biet thu xuan ngoc xuan phuong, lien ke xuan phuong xuan ngoc, du an TASCO, biet thu nam an khanh, du an nam an khanh sudico, lien ke nam an khanh sudico , biet thu nam an khanh sudico, du an nam an khanh, tranh tuong