UEILogger Highlights

• Flexible. Select the I/O required to match your application
• Up to 150 analog or 288 digital I/O per logger
• Easy-to-use, intuitive Windows setup
• Uses standard SD card (2 Gbyte card included holds up to 500 million samples)
• Sample up to 1000 samples per second PER CHANNEL
• Real-time diagnostic display while logging
• Rugged: tested -40 to +85°C, 5g Vibration, 50g shock
• Compact:
  • UEILogger 300 (3 I/O slots) 4” x 4.1” x 4.0”
  • UEILogger 600 (6 I/O slots) 4” x 4.1” x 5.8”
• Extremely cost effective
• AC, DC or battery powered
• Program logger via Ethernet or program stored on SD card.
• Logging may be started and stopped via CAN-bus command.
• Ideal replacement for standard paper chart recorders.

General Description

The UEILogger™ is a powerful, rugged, flexible and easy-to-use data logger (or data recorder) suitable for use in a wide variety of applications. Based upon UEI’s popular PowerDNA family it uses the same DNA series I/O boards. The UEILogger maintains all of the PowerDNA’s flexibility and adds a powerful standalone data logging/recording capability.

Each Data Logger Cube contains the Logger “engine” as well as either 3 (UEILogger 300) or 6 (UEILogger 600) I/O slots. Configure your data logger by selecting the I/O boards required to match your application. With over 20 different I/O boards available, there’s sure to be a configuration to meet your needs.

The UEILogger supports sample rates up to 1000 samples per second on each I/O channel or port. Data is logged onto standard SD Cards (2 Gig SD Card included) and may be retrieved via the unit’s Ethernet port or the directly from the SD Card using a standard SD Card reader. The 2 Gig SD Card included will hold over 500 million 16-bit A/D readings.

NEW FEATURE!! The UEILogger can now display real-time data as it is being logged. This new feature allows you to ensure the systems is working as expected prior to leaving the test site.

The intuitive, Windows-based software provided configures the data logger and extracts the data from the SD Card. There is absolutely no programming required. The software allows you to set input and output ranges, sample/update rates, signal conditioning, etc. all from simple pull down menus. The data logging “program” may be downloaded via the unit’s standard Ethernet port or stored on the SD Card.

Logging applications may be started and stopped Via Ethernet command, On power up, Start/Stop button, Real-time clock/calendar, Sync connector input, or based upon an analog input. The UEILogger cube may be placed on a desk or table or may be mounted to a wall, DIN Rail or in a standard 19” rack. The UEILogger may be AC, DC or battery powered.

• «« Đầu tiên
• « trang trước
• 1
• trang sau »
• Cuối cùng »»