High Functions and Water-proof!
Feature
- Protective structure is IP67.
- Connector type for easy maintenance is lined-up.
- Stable lamp provides.
- Installing strength is twice because inserting fitting metal is applied.
- Both PNP and NPN output are lined-up.
- Detecting distance is 10m for through-beam type, is 2.6m for retro-reflection type and is 0.5m for diffuse reflection type.
Specifications
|
Through-beam type
|
Retro-reflection type
|
Diffuse-reflection type
|
Basic
|
Short-distance
|
|
|
PEX-105C
|
PEX-105A
|
PEX-263C
|
PEX-263A
|
PEX-501C
|
PEX-501A
|
PEX-002C
|
|
PEX-105C -J
|
PEX-105A -J
|
PEX-263C -J
|
PEX-263A -J
|
PEX-501C -J
|
PEX-501A -J
|
PEX-002C -J
|
|
10 to 30VDC(Ripple 10% or less)
|
|
Projector : 20mA or less, Receiver : 15mA or less
|
|
|
|
|
|
|
|
|
Opaque objects with φ8mm or more
|
Opaque objects with φ50mm or more*1
|
Transparent/opaque objects
|
|
|
|
Changeover by switch(L : Light-ON, D : Dark-ON)
|
|
|
|
|
|
|
|
|
|
NPN/PNP open-collector, 100mA 30VDC or less, Residual voltage 1.8V 100mA or less
|
|
|
Provided
|
|
Stable lamp : Green LED, Operating lamp : Orange LED*4
|
|
Cable : φ3.8mm, 2m long, 3 cores*5, Connector : M8(4 pins) connector
|
|
Incandescent lamp : 3,000lx or less, Sun light : 10,000lx or less
|
Ambient temperature/humidity
|
-25 to +55 degrees C(-40 to +70 degrees C 70 degrees C when stored), 35 to 85%RH(35 to 90%RH when stored), Not condensing
|
|
Double amplitude 1.5mm, 10 to 55Hz, each 2 hour in X, Y and Z directions
|
|
1,000m/s2, Each 3 time in X, Y and Z directions
|
|
|
|
Body : resin with ABS glass fiber, Lens(Front cover) : PMMA resin
|
|
|
|
|
Fitting metal, reflector(RRP-50S-V)
|
|
*1 When using RRP-50S-V *2 Using white paper with 20cm□ *3 PEX-105C-0V01 with sensitivity adjuster is lined-up. *4 Not provides with projector *5 Only projector is 2 cores
External dimension
●Lead wire type
*1 Center position of projecting-light for retro/refuse-reflection type. *2 Center position of projecting/receiving-light for through-beam type and center position of receiving-light for retro/refuse-reflection type.
●Connector type
*1 Center position of projecting-light for retro/refuse-reflection type. *2 Center position of projecting/receiving-light for through-beam type and center position of receiving-light for retro/refuse-reflection type.
●Reflector
(Attached to retro-reflection type)
Output circuit
Through-beam type projector
|
|
|
|