High performance with easy handling!
Feature
- Visible laser ray
- High-speed response time, 60µsec(when fast mode)
- 3 kinds of beam can be chosen(Spot, area, line)
- IP67 for sensor head
- Sensitivity correcting function is provided
- Coaxial-reflection type is also lined-up
Applications
Warp detection(Through-beam type)
|
Transparent detection(Coaxial retro-reflection type)
|
|
|
|
|
Height/width detection(Through-beam, length measurement type)
|
Uneven goods detection(Coaxial retro-reflection type, long distance)
|
|
|
|
|
Tip work detection(Coaxial reflection type)
|
|
|
|
Mode
Teaching mode
One-point teaching It can set not to detect back-ground by teaching under no object.
|
|
|
Two-point teaching It sets the threshold at the center between 2 points teaching(object and no object).
|
|
Auto teaching It can set the sensitivity automatically.(it can be set even if the object is moving)
|
|
Teaching length measurement It can distinguish the width(length) of object in the specific area. If it would be over +10%, output 1 is executed and if over -10%, output 2 is executed.
|
|
|
|
Teaching transparent object This mode is to detect the transparent object with retro-reflection type head.(Glass or plastic film etc.) It can detect the object with a little variation of light-receiving amount such as transparent objects by making a one- point teaching under no objects.
|
|
|
|
Zone teaching It can detect within the area between upper and lower limit. It can set during ±10% of light-receiving amount. It can set without influence of background.
|
|
Caution
This product is emitting visible laser beam and is classified as Class 2 by JIS C6802/IEC Laser Safety standard. When exporting to USA, US laser control, FDA(Food and Drug Administration) is applied. Please ask us in details.
|
|
|
|
Trough-beam type
|
Through-beam, length measurement type
|
|
|
|
|
|
Coaxial retro-reflection type, Coaxial retro-reflection type, long distance, Coaxial reflection type
|
|
|
|
Amplifier
Model No.
|
|
LDA-DA
|
Power source
|
12 to 24VDC ±10%
|
Current consumption
|
45mA when 24VDC(including sensor head, excluding analog)
|
Response speed (sensing mode)
|
60µsec/500µsec/2msec(Fast/Standard/Long by sensing mode)
|
Output
|
|
PNP open-collector
|
Control output
|
100mA 24VDC or less, residual voltage 1.8V or less
|
Indicators
|
Laser emitting lamp : green LED, Output lamp : orange LED, Teaching lamp : red LED, Channel lamp : green(1/2CH)
|
Digital display
|
|
Timer function
|
On-delay/Off-delay/One-shot
|
Timer
|
|
Teaching
|
One-point, two-points, zone, transparent object, length measurement
|
Operating mode
|
Light-ON/Dark-ON changeover
|
Analog output
|
|
Input/output setting
|
External input setting : one-point teaching, synchronous input, Projection-off, counter-reset,output setting : 2CH output + alarm setting
|
Zero-reset
|
|
Initial reset
|
Provided(return to initial setting)
|
Connection
|
Cable type(2m long)
|
Insulation resistance
|
|
Withstand voltage
|
|
Ambient temperature/humidity
|
-25 to +55 degrees C(-20 to +60 degrees C when stored), 35 to 85%RH(35 to 95%RH when stored), not icing and condensing
|
Vibration resistance
|
Double amplitude 1.5mm, 10 to 55Hz, each 2 hour for X, Y and Z direction
|
Impact resistance
|
500m/s2, each 3 time for X, Y and Z direction
|
Protective structure
|
IP50(IEC standard)
|
Case material
|
Polycarbonate
|
Weight
|
Approx. 65g(including cable)
|
Accessory
|
Fitting metal
|
Mounting
|
DIN-rail mounting
|
External dimension
Sensor head
Through-beam type
|
|
|
|
Through-beam length measurement type
|
|
|
|
Coaxial retro-reflection type, Coaxial retro-reflection type, long distance, Coaxial reflection type
|
|
|
Amplifier
|
|
|
Reflector
|
RRL-23S(RRRL001)
|
|
|
|
RRL-51S(RRRL002)
|
|
Output circuit
NPN output
PNP output
|