Converting distance data to analog! Provided comparator output
Feature
- This sensor is an optical distance sensor with infrared ray.
- This sensor provides comparator output(2 output) that can set optional distance value and alarm output that executes at the out of detectable area.
- This sensor provides light-emission stop output for preventing interference.
Specifications
PD-10M/PD-10M2
|
PD-10M
|
PD-10M2
|
|
24VDC(±10%, ripple 10% or less)
|
|
|
|
0.2 to 10m(when using specified reflector)
|
|
Plastic reflector with φ100mm(specified reflector)*1
|
|
|
|
|
|
|
|
|
|
|
0 to 10V(Output impedance 100Ω)
|
0 to 10V(Output impedance 100Ω)
|
|
NPN open-collector output(30VDC, 50mA or less), ON when normal operation/OFF when it is out of detection area or light-reception level is less than rated value
|
Comparator output(OUT 1,2)
|
NPN open-collector output(30VDC, 50mA or less), OFF when it is within detection distance
|
|
Contact or transistor input, Stop to emit by shorting to -VIN(0V)(Alarm lamp lights up)
|
|
Power lamp(Green LED) : Lights up when putting power source on Alarm output lamp(Red LED) : Lights up when alarm output is getting OFF Comparator output lamp(Orange) : Lights up when it is within detection distance
|
|
|
|
|
|
|
|
Halogen and incandescent lamp : 10,000lx or less, fluorescent lamp : 6,000lx or less
|
Ambient temperature/humidity
|
-10 degrees C to +50 degrees C, 85%RH or less(Not icing)
|
|
10 to 55Hz Double amplitude 1.5mm Each 2 hour in X, Y and Z directions
|
|
490m/s2 Each 10 time in X, Y and Z directions
|
|
|
|
Sensor : approx. 200g, RRP-100 : approx. 65g
|
*1 Reflection sheet is available, too. Ask us. *2 It doesn't measure during 200msec after putting power source on.
PD-8NM1
|
PD-8NM1
|
|
24VDC(±10%, ripple 10% or less)
|
|
|
|
0.2 to 8m(when using 2 pcs of specified reflector)
|
|
2 pcs of plastic reflector with 80mm□(specified reflector)
|
|
|
|
±200mm(at 5m or less), ±300mm(at 5m or more)
|
|
|
|
|
|
|
0 to 10V(Output impedance 100Ω)
|
Comparator output(OUT 1,2,3)
|
NPN open-collector output(30VDC, 50mA), OFF when it is within detection distance
|
|
Contact or transistor input, Stop to emit by shorting to -VIN(0V)(Alarm lamp lights up)
|
|
Power lamp(Green LED) : Lights up when putting power source on Alarm output lamp(Red LED) : Lights up when alarm output is getting OFF Comparator output lamp(Orange) : Lights up when it is within detection distance
|
|
|
|
|
|
|
|
Halogen and incandescent lamp : 10,000lx or less, fluorescent lamp : 6,000lx or less
|
Ambient temperature/humidity
|
-10 degrees C to +50 degrees C, 85%RH or less(Not icing)
|
|
10 to 55Hz Double amplitude 1.5mm Each 2 hour in X, Y and Z directions
|
|
490m/s2 Each 10 time in X, Y and Z directions
|
|
|
|
Sensor : approx. 200g, exclusive reflector for PD8 : approx. 42g
|
* It doesn't measure during 200msec after putting power source on.。
External dimension
Sensor
* Output 3 in case of PD-8NM1
|
Exclusive reflector for PD-8NM1
|
|
|
Input/output circuit
PD-10M/PD-10M2
|
PD-8NM1
|
|
|
* It can stop to emit by short-circuited to -VIN(0V)
|