DC-JB/JCDC-M
DC-JM
Xem cỡ ảnh lớn

DC-JM



12 pcs of counters are built-in
1 input, 12 presets, 1 output

Feature

  • Excellent visibility by white LCD
  • function that connects 12 pcs of 1-preset counter in parallel is provided.
  • built-in counter(12 pcs of counter, No.1 to 9, A, B, C) can be chose by the key in the front.
  • Output is one and is common use for 12 pcs of built-in counter(OR output) It can check "count-up" for each counter with characteristic display.
  • It can be used as total counter by setting preset value to 0.
  • It can be prohibited to count by count-prohibition key in the front against unused counter.

Specifications

Kind

Increment type preset counter

Model No.

DC-JM4-AW

DC-JM4-DW

DC-JM6-AW

DC-JM6-DW

Power source

100 to 240VAC
(50/60Hz)

24VDC
(Ripple 20% or less)

100 to 240VAC
(50/60Hz)

24VDC
(Ripple 20% or less)

Fluctuation range

±10% when 24VDC, 85 to 250VAC

Power consumption

4VA*1(when 240VAC)

1W(when 24VDC)

4VA*1(when 240VAC)

1W(when 24VDC)

Built-in counter numbers

12

Preset

1 preset

Output numbers

1 output(12 pcs of counter, OR output)

Divider function

1/100

Memory function

EEP-ROM(Re-writing 0.1 million times or more)

Counting speed

Changeover for 30Hz/5kHz

Display

7-segment LCD(LED back-light)

Input signal

Contact or open-collector

Output

Transistor output(NPN open-collector) : 100mA or less, 40V or less
Contact output : 250VAC/30VDC 3A resistance load(cosφ=1)

Control output

Transistor output(NPN open-collector) : 100mA or less, 40V or less
Contact output(1c,1a*2) : 250VAC/30VDC 3A Resistance load(cosφ=1)

Power source for sensor

12VDC, 50mA*2

12VDC, 50mA*2

*1 It includes external power source.
*2 In case of using 120VAC or less as power source, possible to supply 100mA outside

External dimension

Counter

60→48 frame(GZ00003)
Use this frame when using DC-J instead of our counter with 60×60 such as DC-NXB, DC-S series.

Connection

AC Power

DC Power

Note)Power source for sensor isn't provided.

(Caution)

1. Don't use empty terminal as relay terminal.
2. Each input for counting and reset is common use for contact and transistor. Make a wiring with 2-core shield wire and metal as short as possible. Also, don't make a wiring with power and high voltage line etc.
3. Use solderless terminal for M3.
4. DC-J doesn't operate for approx. 2.5 sec after putting power source in.

I/O circuit

Input(counting/counter No.choice)

Transistor output


Contact output(1C relay)

 

 
Các sản phẩm cùng loại
DC-JA
DC-JA
Electronic counter with DIN size
Electronic counter with DIN size
Total counter
Total counter
LED display DIN size Electronic counter
LED display DIN size Electronic counter
Electronic counter with DIN size
Electronic counter with DIN size
DC-JB/JC
DC-JB/JC
DC-M
DC-M

Joomlart
Designed: Hien Dai Hoa Jsc

lien ke van Canh HUD, du an van canh HUD, biet thu van Canh Hud, du an GELEXIMCO, du an cua HUD, biet thu tay nam linh dam, du an tay nam Linh Dam, du an xuan ngoc xuan phuong, biet thu xuan ngoc xuan phuong, lien ke xuan phuong xuan ngoc, du an TASCO, biet thu nam an khanh, du an nam an khanh sudico, lien ke nam an khanh sudico , biet thu nam an khanh sudico, du an nam an khanh, tranh tuong