Image distribution unit(Receiver) for Wired LAN [ JP-Model : RP-VL-R-01 ]

This product is an image distribution unit that can extend the distance between a PC and monitor using a wired LAN. RP-VL-R-01 is a receiver that converts the data received from Ethernet into image signals and outputs them to the monitor. When you use the transmitter and receiver as a set, you can connect monitors in a 1:1 or 1:N configuration without depending on the platform such as a PC and OS. In addition, you can also use a serial I/O (RS-232C) and digital I/O (non-isolated TTL level input x 4, non-isolated LVTTL level output x 4).

	It can easily extend distance by using commercial LAN cable (more than category 5) and HUB between the monitors and a PC that Length of cable has a limit. It converts image signal (RGB signal) into an Ethernet form, and sends it to Wired LAN via Ethernet. Even a long range can transmit a message without letting image data deteriorate.
	By connecting many several receiver, All at once can transmit message to many several monitor screens from a monitor of transmission side. Receiver (RP-VL-R-01) becomes necessary for only the number of the monitor.
	When you use the transmitter(RP-VL-S-01) and receiver(RP-VL-R-01) as a set, you can connect monitors in a 1:1 or 1:N configuration without depending on the platform such as a PC and OS. The same monitor screen can transmit to 1:1 or 1:N screens. The troublesome setting of the utility is not necessary.
	Transmitter(RP-VL-S-01) and receiver(RP-VL-R-01) is not only connects it as 1:1, BY installing a utility in a PC, but also can connect many receivers as a transmitter or a PC as a receiver can connect many transmitters, and it is possible for various connection.
	The data of serial I/O or digital I/O on transmitter (RP-VL-S-01) and receiver (RP-VL-R-01) is converted into an Ethernet form, and transmit a message to Wired LAN.