F&eIT Series Micro Controller Unit(2GB CF, XP Embedded Model) [ JP-Model : CPU-SB304-FIT-45F ]

Operated by an OS such as Windows XP, this microcontroller unit can be used as a general-purpose PC or a controller for a measurement/control/communication device from CONTEC F&eIT Series. This product comes with an 852GM chipset, Celeron M 1GHz CPU and 512MB of memory. Equipped by default with munication interfaces such as USB2.0 and 100BASE-T. The adoption of a heat sink provides a completely naturally air-conditioned (fanless) environment. This product enables functional expansion when an F&eIT Series device is stack-connected to the F&eIT I/F.

	Encased in a compact cabinet (94.0(W) x 120.0(D) x 74.7(H)), this product has a range of interfaces such as VGA, USB2.0 x 4, RS-232C x 2, LAN x 2 (1000BASE-T, 100BASE-TX), audio and F&eIT I/F (for F&eIT Series device modules). This product also has the Secondary IDE Connector that can be connected to an external CD-ROM/DVD-ROM drive.
	This product is provided with Intel (R) 852GM chipset, Intel (R) ultra-low-voltage 800MHz (FSB400MHz) or 1GHz (FSB400MHz) Celeron (R) M processor, and 512MB of memory. It is a faster and functionally more advanced model than the previous CPU-SB20 Series products, with approximately 8-time faster processing speed.
	The adoption of a heat sink provides a fanless environment, while the use of a CF card as a storage device ensures high levels of reliability and quietness. In addition, from a full consideration of safety, the CF card slot comes with a metal bracket to prevent the card from being accidentally disconnected.
	Supporting a wide range of power supplies (12 - 24VDC), the product can be used under various power conditions.
	This product can be used as a controller for a measurement/control/communication device from the F&eIT Series. The measurement/control/communication devices which can be used include digital I/O, analog I/O and serial communication modules. The F&eIT I/F can accommodate up to eight F&eIT Series device modules (maximum total current of each module is 3A or less).
	A detachable metal installation part for attaching the main unit to a 35mm DIN rail is bundled by default, which can be used according to the installation conditions. The system features a unique configuration for its connection to a module on the side in a stacking manner, which allows you to configure the system simply and elegantly without using backplanes and other connecting devices.